32 899.00 Р
В наличии
Interface Characteristics
Fixed Port8*10/100Base-TX PoE ports (Data/Power)
2*10/100/1000Base-T uplink RJ45 ports(Data)
2*100/1000Base-X uplink SFP slot ports (combo ports)(Data)
2 set of V+, V- redundant DC power interface (5P Phoenix terminal)
Ethernet PortPort 1-8 support 10/100Base-TX, Port 9-10 support 10/100/1000Base-T(X) auto-sensing, Full/half duplex MDI/MDI-X self-adaption
Twisted Pair Transmission10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T: Cat5e or later UTP(≤100 meter)
SFP Slot PortGigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC)
Optical CableMulti mode: 850nm 0 ~ 550M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM.
Chip Parameter
Network ProtocolIEEE802.3 10BASE-T, IEEE802.3i 10Base-T,
IEEE802.3u 100Base-TX,
IEEE802.3ab 1000Base-T
IEEE802.3z 1000Base-X
Forwarding ModeStore and Forward(Full Wire Speed)
Switching Capacity64Gbps
Forwarding Rate@64byte4.17Mpps
Buffer Memory4M
Jumbo Frame10K
LED IndicatorPower:PWR(green), network ;Link,link/Act(yellow), POE: PoE (green), Speed:Speed(green)
PoE & Power
PoE PortPort 1 to 4 IEEE802.3af/at @ POE
PoE ManagementDistribution for PoE output power of each port
PoE working status
Delay start of power supply
Scheduling of PoE operation and time
Power Supply PinDefaul :1/2 (+), 3/6 (-),optional:4/5 (+), 7/8 (-)
Max Power Per Port30W; IEEE802.3af/at
Total PWR / Input Voltage120W/48VDC
Power ConsumptionStandby:<6W;Full load:<120W
Power SupplyNo, optional 48V/120W or 48V/240W industrial power supply
Working Voltage48-57VDC; 5P industrial Phoenix terminal, support anti-reverse protection.
Physical Parameter
Operation TEMP / Humidity-40~+80°C;5%~90% RH Non condensing
Storage TEMP / Humidity-40~+85°C;5%~95% RH Non condensing
Dimension (L*W*H)165*148*54mm
Net /Gross Weight<1.3kg / <1.8kg
InstallationDesktop, DIN rail
Certification & Warranty
Lightning protection / protection levelLightning protection: 6KV 8/20us; Protection level: IP40
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class A
IEC61000-6-2(Common Industrial Standard)
Mechanical PropertiesIEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)
CertificationCCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS;
Network Management Features
InterfaceIEEE802.3X (Full-duplex)
Broadcast storm control based on port speed
The speed limit of the message flow in the access port. The minimum particle size is 64Kbps.
VLAN4K VLAN based on port, IEEE802.1q
VLAN based on protocol
QinQ configuration
Port AggregationLACP,Manual aggregation
Max 5 aggregation groups and 8 ports per group.
Spanning TreeSTP (IEEE802.1d),RSTP (IEEE802.1w),MSTP (IEEE802.1s)
MulticastIGMP Snooping v1/v2/v3, Max 64 multicast groups, Fast log out
MLD Snooping v1/v2,Multicast VLAN
Port MirroringBidirectional data mirroring based on port
QoSDiff-Serv QoS
8*Output queues of each port
802.1p/DSCP priority mapping
Queue Scheduling Algorithm (SP,WRR,SP+WRR)
Priority Mark/Remark
ACLL2-L4 packet filtering, matching first 80 bytes message. Provide ACL based on MAC, Destination MAC, IP Source, Destination IP, IP Protocol Type, TCP/UDP Port, TCP/UDP Port Range and VLAN etc. Port-based Issuing ACL.
SecurityPort isolation
Broadcast storm control
Port+MAC binding, IP+MAC+port binding
DHCPDHCP Client,DHCP Snooping,DHCP Relay
System&Management Web Management (HTTPS)
One-key recovery
Login Record

За ту же цену!

32 107.00 Р
33 290.00 Р
33 290.00 Р